Bad Camera/Gimbal shake when breaking

[stu gibson]

Im getting a really bad shake of camera and gimbal as soon as i back of the power or forwards motion,
Making a lot of clips un useable, iv slowed down the brake controls, just thought id see if this was standard for the mavic, Iv already sent mine back when the gimbal and all sensors wigged out hard, iv been highly dissapointed with the mavic from the day i got it,

 

[Egika]

Just be easy on the controls...

 

[stu gibson]

see this example,

 

[Egika]

Wow, that's heavy. Mine shakes slightly when stopping out of full movement.
Also there's a prop in your picture - why is that?

 

[stu gibson]

see how the horizon is crooked after it jerks so much, thats when the prop comes into frame, iv had countless problems with this thing, before this flight today the gimbal was crazy again, i did a recal and it seemed to fix it for a while, sometimes it just sways like its not even functioning,

 

[sonof40]

Is your gimbal completely free of obstruction? Gimbal clamp, etc?

 

[Darkbrood]

Also check to make sure the front part of the gimbal are secured with the bands and the tabs are under the housing


Sent from my iPhone using MavicPilots

 

[sonof40]

Also check to make sure the front part of the gimbal are secured with the bands and the tabs are under the housing


Sent from my iPhone using MavicPilots

Good call. There is one tab behind the cam and two in front.

 

[stu gibson]

yep, all secure. been doing it since i got it, and since it was returned from DJI,