- Joined
- Mar 19, 2017
- Messages
- 4
- Reactions
- 1
- Age
- 41
Finally crashed my Mavic Pro, resulting a broken glass, the one covering the left FOA lens (left, when looking at the drone) .
After the crash, the drone acted crazy. I removed the glass left overs, and re-calibrated the cameras - now it seems to be 90% good. (flying straight, keeping position, and no more calibration error)
Only problems are:
1. Camera is not covered- so need to buy & install new glass
Is it possible to buy this part? can I install it myself?
2. Frequently the Go pro app (Android) will show an alert "Ambient light too weak", and as a result FOA is disabled for few seconds.
* even in full bright day light.
** Seems like the lack of glass (acting as filter) confuses it.
So bottom line, question is - how do I replace this tiny piece of glass?
After the crash, the drone acted crazy. I removed the glass left overs, and re-calibrated the cameras - now it seems to be 90% good. (flying straight, keeping position, and no more calibration error)
Only problems are:
1. Camera is not covered- so need to buy & install new glass
Is it possible to buy this part? can I install it myself?
2. Frequently the Go pro app (Android) will show an alert "Ambient light too weak", and as a result FOA is disabled for few seconds.
* even in full bright day light.
** Seems like the lack of glass (acting as filter) confuses it.
So bottom line, question is - how do I replace this tiny piece of glass?
