Just wanted to share this in case anyone else has this issue.
Im reviewing the Mavic Pro at the moment and after a successful indoor flight (waiting for weather to improve before I can take my first outdoor flight!) I started getting no FPV feed at all. All other functions are fine - can connect and fly, make settings changes to the drone etc - just no FPV feel.
I also got a 'Gimbal Disconnected' error in the status screen.
When trying to reformat the SD card I received an error also - this is with a Lexar 633x 64GB card as well as the original 16GB card.
The way I fixed this (well it hasn't happened since) was to remove the memory card and switch on the drone.
Everything fired up as normal, and FPV feed was active.
I then insert the memory card with the drone still switched on and format the memory card.
This was successful and everything has been fine since.
Just thought I would raise this here in case anyone else has the issue - as Ive seen other with the same problem over on the DJI forums.
Im reviewing the Mavic Pro at the moment and after a successful indoor flight (waiting for weather to improve before I can take my first outdoor flight!) I started getting no FPV feed at all. All other functions are fine - can connect and fly, make settings changes to the drone etc - just no FPV feel.
I also got a 'Gimbal Disconnected' error in the status screen.
When trying to reformat the SD card I received an error also - this is with a Lexar 633x 64GB card as well as the original 16GB card.
The way I fixed this (well it hasn't happened since) was to remove the memory card and switch on the drone.
Everything fired up as normal, and FPV feed was active.
I then insert the memory card with the drone still switched on and format the memory card.
This was successful and everything has been fine since.
Just thought I would raise this here in case anyone else has the issue - as Ive seen other with the same problem over on the DJI forums.
