switching off transmitter midflight

[colintheig]

Hi all, I have a flight assessment tomorrow and I just wanted to ask how other operators using a Mavic would attempt "switching off the transmitter” re the following:


It is a CAA requirement that you can successfully demonstrate the recovery of the aircraft from a ‘loss of control link’ and return the aircraft home. This will be done by breaking the link by switching off the transmitter - not using a return to home function (if fitted). The aircraft should be set up so that this exercise can be successfully accomplished.


To force a RTH I have tried pressing to off on button on the controller as you do pre flight but it wont shut off. any ideas?

 

[CaveDrone]

Just like turning on, press twice and hold down the second time.

 

[Johnmcl7]

This video is a good demonstration of switching the controller off mid flight:

 

[colintheig]

thanks for the help

 

[TrayBoz]

Set the RTH function to: HOVER instead of RETURN TO HOME. The mavic should just stay put until you re-establish connection with the remote, as long as it has the battery life to remain in the air.

 

[Kilrah]

You absolutely don't want to do that since according to the first post the exam asks for a demonstration that it DOES return to home.