Recent content by adamb1123

or rather, here is just the arm (the camera works fine)...

Dang. What's the fix for that? Something like this? https://www.amazon.ca/Original-Disassemble-Spare-Gimbal-Camera/dp/B077GB9WZL/ref=sr_1_8?keywords=mavic%2Bgimbal&qid=1551390132&s=gateway&sr=8-8&th=1 It's definitely getting super hot.

Ok thanks. Will do that too. For what it's worth, just tried putting a little piece of gaff tape as a makeshift support in there. The micro vibrations were gone, but the gimbal inconsistency was still there. That side motor gets scorching hot.... I wonder why. I wouldn't be surprised if it...

Copy that - will start with the ribbon cable. Do you think I should not worry about fixing that L clip?

Thanks Thunderdrones, is there anything else I can do to help diagnose? New ribbon is going to be about $120USD installed. Do you think it would be that if it's only not working intermittedly? Here's a picture of another drone with the broken L clip.

Hi guys - Having a frustrating problem that appeared after bringing out my Mavic 1 that's been sitting on my shelf ever since I bought the Mavic 2 6 months ago.. After turning on, the gimbal fails about 50% of the time with an obstruction error, and even when it's working, occasionally it...

Anyone solve this? I know a lot of the issues with the original Mavic's 'gimbal overload' error were fixed by replacing the ribbon cable. Is there an easy fix like this for the M2P? I'm also leaving in 2 weeks for a big trip and trying to avoid a lengthy DJI repair.

Having the same problem. I get a feed, but the gimbal is reporting errors. Did any of you find a resolution for this? My error is the same, and it's occuring after a small crash (about 2-feet, bumped into a wall). I had a similar problem with my other original Mavic, which needs a ribbon cable...

Having the same problem. I get a feed, but the gimbal is reporting errors. Did you find a resolution for this? My error is the same, and it's occuring after a small crash (about 2-feet, bumped into a wall). I had a similar problem with my other original Mavic, which needs a ribbon cable...