Recent content by armando

I've started noticing a "shake" on take off after downgrading, however mine seems to go away after a few moments of flight. Not sure why it starts, or stops, but I've noticed the same thing, but my "shake" goes away after a few movements of the aircraft. What firmware are you running on the RC?

If it’s a functioning air field, you’ll be dealing with an NFZ. I believe that the list comes from tha FAA. You can always check to see if it’s on DJIs site as an NFZ.

Best of luck. Keep us posted.

I haven’t tried to go back up in firmware versions, but I would be surprised if it was a problem because I can’t imagine DJI drawing a line in the sand and preventing owners that purchased their bird in August or September of 2017 to not be able to upgrade to the firmware released in January...

That was not my experience. I was able to go directly from .04.0100 to 1.03.1000

I was able to use the DJI Assistant to roll back to 1.04.0100. From there I used DUMLdore to go back to 1.03.1000 and tested to make sure that I had no errors. After I was able to confirm that I didn't have any problems at 1.03.1000 I went directly back to 1.03.0400. Once I confirmed that...

I am not seeing any glitches so far, but I've only flown enough to get through a single pack so far. I am not seeing any motor current error messages, but in previous attempts to roll back I have had some issues with errors related to the ESCs that showed up and would not let me take off. I...

Success! I was able to roll back the firmware on my Mavic Pro Platinum to the release I was looking for. I'm going to try to provide as much detailed information as I can in my post, but please bear in mind that this was only my experience and may not be accurate for everyone, however because...

I will run the downgrade process again and then make sure that I only have the flight recorder error. If I get to that point I’ll need to open the top of the mavic platinum and install an sd card, 16gb max size, and then reboot to confirm that the error is cleared. If I get the ESC error then...

I've spent some time reading through the forums here and combed through the videos on how to perform the downgrade. I guess that question 1 is,..... Is there a difference in the firmware and downgrade procedures for a Platinum versus a Pro? I stumbled across this post on the internal flight...

Looking for a little help here with a firmware downgrade. Here is some background info: I’m running Windows 10 with all firewalls and AV disabled. I’m running Dumbledore without connectivity issues All download, upload and firmware flashes appear to complete successfully. When the process...