Case for RC Pro

[ddodell]

Looking for a case like I had for my Smart Controller that I can store/protect an RC Pro inside my backpack, without having to unscrew the controller sticks.

Can't find anything online yet.

 

[Gagey52]

I remember seeing a post somewhere a chap produced a case with his 3D printer. If I find it again I will post, it wasn’t here unfortunately.
Regards

 

[msinger]

SunnyLife made this one:



However, it's not going to be available for a few weeks.

 

[Starz]

I have to flip the rings up, but fits and works well. Same one as above.

 

[ddodell]

SunnyLife made this one:

View attachment 140427

However, it's not going to be available for a few weeks.

I had that one for my Smart Controller, but I thought the dimensions of the RC Pro controller were different and this wouldn't work?

 

[ddodell]

I have to flip the rings up, but fits and works well. Same one as above.View attachment 140429

Is that the Smart Controller or RC Pro? It appears the dimensions are different?

 

[Starz]

Is that the Smart Controller or RC Pro? It appears the dimensions are different?

Not the rc pro. I don’t have the new version, so I can’t confirm any dimensional info. My though would be that they are the same dimensions.

 

[ddodell]

Not the rc pro. I don’t have the new version, so I can’t confirm any dimensional info. My though would be that they are the same dimensions.

I thought so two, but I looked at the spec on the DJI website and the new RC Pro is slightly different dimensions.

 

[msinger]

Per the DJI Store, here are the dimensions:

• Smart Controller:
  177.5 x 121.3 x 40 mm (antennas folded, and the control sticks unmounted)
  177.5 x 181 x 60 mm (antennas unfolded, and the control sticks mounted)
  
  
• RC Pro:
  183.27×137.41×47.6 mm (antennas folded, controllers not mounted)
  183.27×203.35×59.84 mm (antennas unfolded, controllers mounted)
  

For whatever reason, SunnyLife is currently using photos of their Smart Controller case to advertise their new RC Pro case.

 

[ddodell]

Per the DJI Store, here are the dimensions:

• Smart Controller:
  177.5 x 121.3 x 40 mm (antennas folded, and the control sticks unmounted)
  177.5 x 181 x 60 mm (antennas unfolded, and the control sticks mounted)
  
  
• RC Pro:
  183.27×137.41×47.6 mm (antennas folded, controllers not mounted)
  183.27×203.35×59.84 mm (antennas unfolded, controllers mounted)

For whatever reason, SunnyLife is currently using photos of their Smart Controller case to advertise their new RC Pro case.

I just checked Sunnylife "store" on AliExpress ... and they are showing the case but for both controllers ... so wondering if they bothered to remeasure versus just label.

 

[c.oberschneider]

I've been using this PGYTECH protector with the old smart controller and absolutely loved it. Unfortunately they have not yet released a version for the RC pro.

 

[ddodell]

I've been using this PGYTECH protector with the old smart controller and absolutely loved it. Unfortunately they have not yet released a version for the RC pro.

That would be perfect too since the controller is just slipping into my photo pack. I'm going to try emailing them if they have an ETA for a release.

 

[chong67]

That would be perfect too since the controller is just slipping into my photo pack. I'm going to try emailing them if they have an ETA for a release.

Any ideas when they will this cover for the new controller?

 

[veryzebra]

Mine fits in a generic binocular bag.

 

[GadgetGuy]

This one is better. You don't have to remove the sticks!

Sunnylife For DJI RC PRO Storage Bag With Screen Remote Control Portable Handbag | eBay

Sunnylife For DJI ACTION 2 Storage Box Mini Portable Anti-fall Protective Box. Sunnylife For DJI Mavic 3 Lens Cover Gimbal Sensor Integrated Protective Cover. For DJI MAVIC MINI/Mini SE fully-enclosed propeller guard anti-collision ring.

www.ebay.com