Changing controllers

[oc1doc]

Hi! Just got a RC 2 Pro and want to use it with my Air 3s and Mini 5 Pro. Both drones are already linked to RC 2 controllers. Anybody know the unlinking / linking process? Thanks!

I tried the Mini and it wouldn't go into link mode even with its RC 2 off. But the Air 3s linked just fine. Confusing!

 

[GadgetGuy]

Hi! Just got a RC 2 Pro and want to use it with my Air 3s and Mini 5 Pro. Both drones are already linked to RC 2 controllers. Anybody know the unlinking / linking process? Thanks!

There is no RC 2 Pro.
There is only an RC 2 and an RC Pro 2.
Google is your friend.
Results of Googling linking the RC Pro 2:

Step-by-step linking process:

1. Power on devices: Turn on both the DJI RC Pro 2 controller and the aircraft you wish to link.
2. Open DJI Fly app: Launch the DJI Fly app on the controller. If the controller is new, follow the initial setup instructions first.
3. Navigate to pairing settings:
   • From the home screen, tap Connection Guide in the bottom right corner.
   • Alternatively, go to Camera View, tap the ... icon in the top right, go to the Control tab, and scroll down to find Re-pair to Aircraft (Link).
4. Initiate linking: Tap Re-pair to Aircraft (Link) on the controller. The controller will begin to make a beeping sound.
5. Activate aircraft linking mode: Press and hold the power button on the drone until it beeps once, indicating it is in linking mode.
6. Confirm successful link: Wait for the linking process to complete. The beeping on the controller will stop, and the status indicators on both the controller and the aircraft will turn from blinking to solid green.