I would love some input on a flight that had me puzzled a bit. I was testing camera settings by flying approx 2m over some water in order to challenge the camera settings flying with light from the back and front. On this flight i noticed the Mavic ascending and descending a little bit during the flight after which the DJI App crashed. I kept flying while reloading the app again after which a warning message restricting the flight appeared. I flew back to base, landed and powered everything down and up again after which no problems were encountered. But what happened? If anyone can provide me with some insights then I would be grateful. Links below.
I suspect that the vertical avoidance system could have confused the app owing to the low flight over water. I am aware of the various threads on this subject - but I did not suspect it could outright cause the app to crash...
Thanks in advance for any input afforded.
CSV:
2017-08-27_15-41-38_Standard.csv
KML:
Airdata-37b09b8a794b56a992eade8e32d0d30f.kml
Airdata share:
Airdata UAV - Flight Data Analysis for Drones
I suspect that the vertical avoidance system could have confused the app owing to the low flight over water. I am aware of the various threads on this subject - but I did not suspect it could outright cause the app to crash...
Thanks in advance for any input afforded.
CSV:
2017-08-27_15-41-38_Standard.csv
KML:
Airdata-37b09b8a794b56a992eade8e32d0d30f.kml
Airdata share:
Airdata UAV - Flight Data Analysis for Drones