Epson BT-300 Moverio AR FPV Glasses

[Squaddie093]

I have a pair of the BT-300 glasses which I used to fly my Mavic Air using the Go4 app I now have a Mavic Air 2 does anyone how I can fly it with the glasses as the drone uses the Go Fly app.

Hopefully someone know what I am talking about....

 

[lannes]

The Epson BT-300 is not compatible with DJI Fly as it's only a 32bit architecture and DJI Fly is 64bit.
So it won't work with the MA2 or the MM

 

[Squaddie093]

The Epson BT-300 is not compatible with DJI Fly as it's only a 32bit architecture and DJI Fly is 64bit.
So it won't work with the MA2 or the MM

Thanks for your reply pity DJI and Epson could put it so simply

 

[FPVOpa]

There ist a possibility, you can connect your smartphone and the moverio bt-300 by miracast.
In the remote controller you have the smartphone with the go fly app and connect it with smart view and miracast on the moverio.

(sorry for my bad english language, bur I hope you understand it)

 

[lannes]

There ist a possibility, you can connect your smartphone and the moverio bt-300 by miracast.
In the remote controller you have the smartphone with the go fly app and connect it with smart view and miracast on the moverio.

(sorry for my bad english language, bur I hope you understand it)

Apower mirror is the best app I believe to mirror to the BT-300

DJI Fly cast to Epson BT-300 without the need for wi-fi connection only the devices connected to each other

Hi all Been experimenting with the Epson BT-300 and casting DJI Fly from an android device (Samsung S8) without both devices being connected to wi-fi network (internet) This solution allows you to have only the BT-300 glasses/ controller box and your phone in the field using the mobile hotspot...

mavicpilots.com

 

[DanMan32]

Hmm. That could solve all sorts of problems that's come up with the Movero. That of course depends if the smartphone hosting the DJI apps can cope with the high demands of the DJI app and the mirroring SW. I've tried this to project to my laptop so it can be seen over a projector and it was problematic.

 

[FPVOpa]

There ist no Apower needed. The BT-300 has mirrorcast (information on page 40 and 41 in the manual) and my Samsung has SmartView, that all you need