Firmware .400 vs .700?

[MKAL]

Dear Mavic specialists,
I need your comments about firmware .400 and .700.
Which one is better - few anomalies or issues?
Thank you for any info.

 

[Cut.Aussie]

.1000 is better.

 

[Testman]

400.

 

[Testman]

Hi, Is .400 works OK with different ha*ks?

Yes.

 

[Kilrah]

700/4.1.3 does everything.

 

[Testman]

400 have best signal strong.

 

[Robbyg]

I use .400 but I spent a day flying with .700.
400 feels more stable and responsive and the signal was more stable than 700 also it has less NFZ issues.

700 also felt pretty good and it has fixed wing mode and better goggle compatibility. It all depends on what you want to do, I am only interested in a drone that flies on demand and shoots good video.
You can't go wrong. With either one so use Dumbldorf and give each version a try.

Rob

 

[bonzo]

.400 and go 4.06, fly with or without phone.
I like goggles and no phone, can still do camera settings in goggles.

 

[MKAL]

Thanks People! I have downgraded to .400 and will do test later today.

 

[Top Hat]

FW 400 OEM w/ 405 rock solid in my own experienced.
Not interested w/ any other added feature w/c are useless to me.
I stayed w/ this setup coz of reliability and the performance of the MP.
And most of all I do not need to deal w/ that NFZ authorization thing, meaning I can take off anywhere and fly responsively.

 

[bonzo]

I am back to tell you guys mavic .400 FW - with- goggles.1000 FW, all head tracking functions seem to be working just fine.

 

[ariksaja]

I think it depends on:

1. Hardware , I don't know why, but I can't use fw 400 because it is drive my mavic crazy. My gimbal dance and become very hot after start up. My brand new mavic is preinstalled with 500 fw though before.

2. Pilot. I'm happy enough to update 2 times after I received my mavic combo and i'll never upgrade above 700 again. It's enough for me to take photos, and it's enough for me to take videos. No matter how good new firmware is, it's limited by the hardware which is mentioned in no#1. Eg: camera spec.

So my conclusion is, no matter which firmware do you use , eventually it depends on your own situation and devices.

 

[JMF]

I'm running .700 and DJI Go 4 V4.0.8, been working without any problems.