DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Hello from Newcastle NSW

Hello from the Crossroads of America Jordo.

Welcome to the Forum. :cool:
 
Welcome to the forum. Not sure which drone you have, but you can watch videos from Air Photography, FlyPath, DM Productions, etc. on Youtube. Actually there are a lot more channels about drones on Youtube.
 
Cool thanks, I'll check them out!
 
  • Like
Reactions: GFields
Welcome to the forum! :)
 
Welcome to Mavic Pilots! :) Enjoy the forum!Thumbswayup
 
Welcome to the forum.
I hope you will find our site helpful and look forward to any input , photo's/video's you might post .
Don't be shy and ask anything if you can't find it by searching . Thumbswayup
 
Welcome to the forum. We look forward to your participation and your view of the world.
 

Hey Jord,

Welcome from the Hampton Roads area of Virginia, USA. We have a Member's Map in the Upper Right of the Title Bar.

Since you live in Down Under, there are specific laws and rules for you to follow, please check to ensure these are current.


Even if you have flown Drones before, here is some Good Old Fashion Advice…

Do not let the excitement of the moment get the best of you. When you are going out to fly, do it slowly and deliberately. Get used to a set procedure and even practice it.

There are so many things I could write but these are the highlights that I feel need mentioning.

Plug in your phone/tablet into your controller; turn on the Controller and DJI Fly App (if it does not start on its own…). On the Drone, open the front legs, then open the back legs, then remove the Gimbal Cover.

The Gimbal is the most delicate item on the Drone and banging or bumping can damage it. I also fastened a short "Remove Before Flight" ribbon to the cover so it's more noticeable and I do not forget to remove it…

Turn on the drone and watch it come to "life." Watching the Gimbal go through its self-check is almost like watching a kitten or puppy opening its eyes for the first time…

Place the drone down (preferably on a Landing Pad) while it finishes its self-test (collecting satellites, etc…).

Check your battery status (Phone, Drone, and Controller), check the Signal Strength, by now the Controller should have reported it updated the Home Point.

Lift off, 4-5 feet (1-1/2 meters) or so, hover a bit, check the controls (move the drone a bit forward, back, left, right, yaw left and right). By now, your Controller will probably report again, Home point Updated.

If you go out in a rush and race thru your start up and take off before the drone has finished it prep, it may update its Home Point over that pond or that old tree you are flying over and in your excitement, you'll fly the drone long past it Low Battery point and when it engages Return to Home and lands in the pond or in a tree; it will be all on you…

Now go have fun, learn to fly the drone by sight before you try to fly it out a distance depending on the video feed, FPV.

I would also advise you to use YouTube and watch a lot of the Videos on flying and setting up the Drone. When it is too dark, too cold, or too wet, you can "fly it vicariously" through YouTube. Also watch some of the Blooper Drone Videos and learn how not to fly your "New Baby."

Below is the link to all of the downloads offered by DJI for the Mini 2, including the User Manual.

After you read the Manual, read it again, you will be surprised what you missed the first time and you will be better prepared for that first "scary moment…"


Happy, Safe and Legal Droning…
 
  • Like
Reactions: Jordo
Greetings from Birmingham Alabama, welcome to the forum!
 
Hi, I'm Jord from Newcastle, NSW, Australia. Fairly new to drone photography, but am loving it so far. Any recommended videos or websites you have found helpful for beginners please let me know! I have the DJI Mini 2, Cheers
Welcome to the forum , from the Sunshine Coast Qld. This forum has a lot of good info , check it out , from a newbie Mavic 2 Pro.
 
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Forum statistics

Threads
130,599
Messages
1,554,254
Members
159,603
Latest member
refrigasketscanada