DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Lanyard anchor fittings

THE WOMBLE

Well-Known Member
Joined
Jan 27, 2018
Messages
262
Reactions
218
Age
83
Location
Wellington, NEW ZEALAND
Wanting to purchase 2 anchor fittings so as to be able to use a lanyard on a CRYSTALSKY MONITOR 7.85". Have tried the ones that are used on the MAVIC2 smart controller but the threaded shaft is the wrong diameter. Any help would be much appreciated.
 

Attachments

  • anchor.png
    anchor.png
    261.3 KB · Views: 43
The lanyard holes on the 7.85 CS are 5mm x.80 pitch and are widely available at Lowes and Home Depot. The holes have a depth of about 5mm. What I found with the 7.85" CS is the lanyard holes are mounted on the sides of the monitor making them more or less useless as a receptacle for lanyard mounting as it would flip the monitor (and the view) 90 degrees. I suppose you could use the mounting holes with attached lanyard as a safety line or as a way to free up your hands to fiddle with the drone with the monitor hanging down from your neck. But as a method to take some of the weight off while flying..........well that just isn't happening.
 
  • Like
Reactions: DavidNDC
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Forum statistics

Threads
130,583
Messages
1,554,088
Members
159,586
Latest member
maniac2000