Marco Polo Placement on Mavic Mini.

[RodPad]

I have Marco Polo tracker, I'm sure mine is the same size as the now "Ultralight".

On the battery door of the MavMin I stuck the same type of Velcro that is on my P3A.
Where else could you put it and not interfere with GPS and other sensors?

If it is Horizontal which was the best way to get the most Velcro grip, It is pretty hard to get it to where the props don't touch it.
Vertical just doesn't seem to have enough contact area.

Anybody done this yet?

Rod

 

[lannes]

Maybe on lengthwise on the side of the body between the arm mount points, just above the slotted vents

 

[RodPad]

Thanks...
If I were to strategically stick Velcro as your suggestion..
This would be the area that the back prop arm would make contact (brush against the Velcro) when it is folded up?

I think its the best so far.

Rod

 

[lannes]

Thanks...
If I were to strategically stick Velcro as your suggestion..
This would be the area that the back prop arm would make contact (brush against the Velcro) when it is folded up?

I think its the best so far.

Rod

Maybe if your try the 3M extreme dual lock Velcro, you can get away with a smaller piece so the legs can close

3M Scotch Extreme Dual Lock Fasteners Review

Scotch’s Extreme Fastener strips are a great alternative to Velcro and hook and loop products for mounting objects (up to 2 pounds per inch, 10 pounds total) to other surfaces.

toolguyd.com

 

[RodPad]

Thanks!
I think I have seen that stuff.
I'm about ready to fly this thing. I will take some picts of my current config, before I crash it.

What I seemed to be missing, is the documentation detail from Page# 33, #8.

Just found the link:
Mavic Mini - Hit a Tree in Quickshot Mode

The detail information about "Intelligent Flight Mode"
Where is this?

Rod

 

[RodPad]

OK, I flew it and I still have it!
It was really scary.

Will update later.


Rod