Problem setting up dual contollers

[cbanquer]

I do not know if there is already and existing post on this topic.
I've been trying to set up primary and secondary controllers.
My problem: when I link the regular controller as secondary, the primary (smart controller) disconnects; and vice versa.
What am I doing wrong? The firmwares and app are all up-to-date.
Thank you for your help.

 

[Danr-62]

This video might help you,

 

[DanMan32]

Note that the video was done before the Go app update made it to the Android. We're way past that version now so you don't need an iOS.

 

[THE WOMBLE]

When I set up the secondary controller I left the main controller switched off. When linked I set the controller as secondary. I then turned the main controller on and it linked and showed as the master controller.

 

[raven swe]

I left the sc turned on when I linked my std controller and it all worked first time

 

[Photo Beaty]

When you link the two controllers one must be designated as secondary and the other as primary. From then on they can both be used to control the Mavic 2.

 

[DanMan32]

Except control input on primary will override and temporarily lock out control on the secondary. Some settings will be missing from secondary.