to link DJI Goggles and Mavic Air

[SKI_Air]

Hi guys,
Anybody knows how to link DJI Goggles and Mavic Air?
I'm still have no success.
Thanks!

 

[zezrum]

OTG micro-usb cable from the goggles to the USB port on the RC. Haven’t tried it myself yet, but should be the same way as with the Spark.

 

[SKI_Air]

Thanks, will try it now!

 

[zezrum]

Sorry, I misspoke above. OTG cable is NOT required for Mavic Air connection to goggles. Just USB cable (micro end into goggles, USB end into bottom of controller, make sure the micro on the left side of controller is disconnected). Goggles need latest firmware update. Goggles RE require a new firmware unreleased as of yet by DJI. Hope that helps, sorry about the wrong message above.

 

[Trevlam]

Also note you CANNOT have the phone and goggles plugged in at the same time.
So you can only use one or the other end of story and I confirmed with DJI last night.

Sucks but why can you do.

 

[msinger]

Also note you CANNOT have the phone and goggles plugged in at the same time.

If you want to use both, you could use a mobile device that has an HDMI output (like the Nvidia Shield K1). Then, connect the DJI Goggles to that HDMI output instead of the remote controller. With that setup, the goggles will be a view-only device. You won't be able to use the menu options, head tracking to tilt the camera, etc.