Recent content by Pepzki

I dont think if he just replaced the ribbon cable AND the braided camera cable? I dont know when software tweaking needed. Replaced gimbal arm, ribbon and camera over year ago, worked fine just from that.

Dont know do anyone need this but i put a link here so someone might find help from that to unlock drone:

Any better flight time?

Flight time? Any errors? I got motor over current error/battery current errors with my parameter modded mavic pro in colder weather with silence platinum props.

Any issues after that? I have snapdragon note 4 and i get non controlled movement in vr mode after couple minutes.. I have to disable hd mode and internet and try if that helps. Also noticed fpv video quality is far worse than on dji go.

Lucky! You should keep an eye on your drone and finger on pause button in case if it goes too near objects.

Ribbon cable is the weakest and cheapest part. I would start there.

I think you find all info what you need from digdat0 video: If you have mac you find same guide from him also. If still questions remain just ask.

So i tested with 1.04.0000 everything worked fine. Put back to 1.03.0700 and then erased 305 and 306 file from 1.04.0000 and put in. Now able to modify parameters and working with 4.1.10 (android) which should be able to FCC modified (not test flyed by my self). Active track and quickshots works...

Do you mean have to update like to V01.04.0100 and then to like v01.03.700?

I got mine working with cheapest gimbal arm on ebay with pre installed ribbon. Gives still gimbal error in start if app already running. Found then focus error on left up corner. Ordered cheapest cam in ebay. Not focused at all got refund and new try coming. I tryed to revive that non focusing...

Got it working?

What you get?

DJI Mavic Pro Gimbal/Camera/Forward Sensor Control Board Replacement Part | eBay Not sure about the seller, not so many sells.. Could be still the ribbon cable tho..

What i have learned so far it might be faulty gimbal pcb board. Due to non moving gimbal, that disconnected message and not video feed. Not yet really sure does this message is correct: "The gimbal main board is integrated to the gimbal and the gyroscope has been calibrated before shipment. The...