Recent content by PeterX

If you fly in area of city then is it important to check it on the map. I learned it with my P3S in hard curve. So i check it on both copters of my own.

What is able to use tabfly in Mavics firmware? Change to satellite map screen and use tabfly if you want to use it.

"Konnichiwa" from ?? and ?? toyou in ??... and welcome aboard. You can find or leave tip´n´tricks in this forum. "Jamatta"

Greetz form ??and?? to you in??. Always a safe and happy flight.

I don´t know yet,if the RC lost connection to the mobile and back again,does the mavic fall back in to the beginner mode for that time ? On my P3 has the beginner mode kicked in ,if i fly without the mobile. On my MPP i did´nt test it yet.

Swipe that menu left to right or in oppside direction to fin it.

Did you look to the flightlog after each flight and tabbed the cloud on the upper right corner?

The intern memory is reserved for automated flights and firmware updates.

Did you synced all flights after 1/9/21 ?

Check all wires in and around the gimbal,may be one of them is ripped off or not fitted right on the plug.

Is the USB port of the Kindle avalable for host and is the ADB mode for the USB port swicthed on?

May be the wire for GPS module is unplugged through the crash and needed to plugged in again.

Pro Litchi:Autonomous flight does not need permanent connection from RC to AC WP missions are stored on internal sd of the AC Mission can planned on PC via flight hub Interpolation of the gimbal can be setted via WP planning Pro Go4: All calibrations and services...

Ferkemup has the fully telemetry and all error messages on screen,the whole vision system is failing completly.

1st power on the win10 and then dload the Assistant2 for mav and istall it. 2nd start the assiastant as admin and power on the RC and plug the c-side of the USB wire to the side USB of the RC and power on the RC 3rd The assistant request the connection to the DJI device,plug the A-side of the...