Recent content by Scarpi59

This could be a Hirose connector, you can find it on DIGI-KEY

I believe the problem are non the screws, original or not but the gauge of the screws. With mini 3 PRO DJI uses 1,2 mm screws while for mini 2 these were 1,9. As you can see from the attached file with the new mini 3 DJI uses the same screws of MINI 2. Due to a slight impact I broke the...

There’s an app called d-space that is similar to d-Flight but it’s non free

The same error 30064 for me after using DJI Assistant 2.1.11. The previous release doesn’t ricognizione Mini 3 pro. I found this link DJI Mini 3 Pro unable to take off or fly after Assistant 2.1.11 update

Hi, the only italian official flying map is d-Flight. You must Go to www.d-Flight.it and create your account. Then login with this account and you will find all the no-fly zone, the restricted areas and the free zone where you can fly. Be careful that many natural parks, also is marked free...

Hi, I suggest you to visit the ENAC web Pages for all the informations you need. The Flight rules are the same of the European regulation. To know where is possible to fly in Italy you must refer to the site www.d-Flight.it and register on it. However is strictly forbidden to fly near the...

I don’t believe you can fly on Ponte Vecchio and in general in all Florence neither with a Mini 2 or Mavic Mini. Take a look at this image

Try to upgrade with your pc using DJI Assistant 2 For Mavic and an usb cable

Unfortunately flying in ITALY is not so easy like in other countries because of many archeological sites and natural parks. I suggest you to register to this site where you can find a map where you can Fly and not https://www.d-flight.it/new_portal/en/

I use Litchi from 2 years. It has many options that DJI GO4 Waypoints has not. Beyond the possibility to create a mission without switch on the drone, You can create a relative to ground path so the drone can follow the terrain keeping the initial setted costant altitude. But the gretest feature...

You must upgrade DJI GO4 to version 4.3.25. If you reset to factory setting you have the release 4.3.16 that has not this option. You need to download the release 4.3.25 directly from DJI as .apk and then copy on SC and launch it

Yes, you’ll find the file .apk under the directory “download”. When done switch on the drone and when asked update the same if required.

The only way you have to Install this release is to download the file directly from the SC and then launch it to upgrade. The link is that I posted above