Recent content by windless

Sorry should of replied sooner. some one suggested blasting with compressed air to make sure no grit. miraculously it worked had no trouble since.

Well sports fans some serious learning today. Firstly , the issue with the camera gimbal constantly reading motor overload and pointing to hell, was solved be the judicious application of high pressure air that must have removed some sand or dust caught in the gimbal motor. Depression to ecstasy...

Fantastic tip

Ac less than 6 months old. No crash’s. minor fucups but nothing major.

Today while flying my controller started to read gimbal overload error. I was using a ND32 lens so landed and rechecked clearance. The problem with gimbal has occurred before but usually fixed by restarting. This time it was not the case so I removed the lens and restarted again, but still had...

Try again https://www.dropbox.com/transfer/AAAAABBrr4eafqWBhwKZ32OBnYhYY5M9ybVGsG6Djd026ipfX8OIzCY

https://www.dropbox.com/s/9yto3nhwwfjfo5l/DJI_ASSISTANT_EXPORT_FILE_2020-04-13_11-00-02.DAT?dl=0

Thanks for all your comments. I will try try and upload the flight data as suggested. When it first took off it did indicate ALTT mode and then switched to GPS mode while hovering (I think). As it was close I was not too concerned. I was in a pretty remote area of the WA coast. Cheers

At the beach yesterday and forgot my phone. My son was about 40m offshore surfing so I thought I would get some shots just using the controller unit as all was well within sight. Unfortunately , it must have switched to beginner mode and then reset my son as the home point while I hovered over...

What I would like to do is exceed the 500m . I live in buttfuk nowhere, where the tallest thing is a 5m anthill

Has anyone manage to do this yet for the latest version of assistant 2 . I fly a Mavic Pro Platinum.