Recent content by Shanedel

Did you try upgrading via older version of DJI Assistant app which is available under the phantom 4 downloads. DJI Phantom 4 – Specs, FAQ, Tutorials and Downloads Done the trick for me and solved the drifting issue I was originally getting.

I was onto DJI this morning regarding issues I was facing with latest update.They suggested upgrading via older version of DJI Assistant app which is available under the phantom 4 downloads. DJI Phantom 4 – Specs, FAQ, Tutorials and Downloads Done the trick for me and solved the drifting issue I...

Yes in my front garden at about 2m altitude for all tests. It would drop down to .5m (it landed once) this morning it went up to 3m. Its all over the place. In the middle of a .400 downgrade now to confirm whether this is a firmware issue or something I have done wrong.

Mine was manufactured on Wednesday, March, 1st 2017 Tried re-calibrating the IMU twice last night and then again first thing this morning and no change.

If you connect it to the DJI Assistant app on your computer there are options to downgrade

Ok so i tried downgrading to .550 and it hung at 86% both times I tried it. Mavic is also not being detected by assistant now either. Checked the version from the app and it says 550 so I took it out for a quick test and it is the same if not slightly worse, to the point where I was nervous...

If it was moving the same direction every time maybe this could be the case but it is randomly moving in different directions. I will give it a try though. After having a look at this and where it shows no stick input, i can clearly see the drone drifting. Looks like i may try downgrading.

Anyone else experiencing extreme drifting (10 foot before I corrected it) and altitude loss (slowly descends until it lands) when hovering? It used to be rock solid. I have tried re-calibrating the IMU and compass and also refreshing the firmware in the assistant app.