Error 200 after crash

[lctham]

I had a small crash recently with my Mavic Air. I hit a tree which about 4-5m high.

The Drone didnt appear to suffer any damage, however when I try and start up the drone now, I get the 200 Error - unable to start drone, check USB cable error message.

I am not getting any live view when I connect the drone to the app (DJI GO 4), however I am able to see the camera working when I calibrate the drone via my PC using DJI Assistant 2.

I've taken apart the Drone to check for any loose cables, but everything seems to be connected. I have updated to the latest firmware and done a factory reset

Do I need a new video transmission cable? Or do people have any other ideas?

 

[Detritalgeo]

Hi,

The camera in the assistant calibration routine is for the forward vision systems, not the gimbal camera.

With no live view present I would say the gimbal camera cable has been damaged and I can confirm this will cause the "code-200" condition.

The gimbal is easy to dismount and the cable routing is covered by a few delicate panels. Follow the German YouTube video and you should be able to inspect the cable.

Cheers,