gimbal unblock

[Al_Fly_Aviator]

How can i unlock my gimbal from a mavic air drone because the movement is block on the
remote control
The function button C below the photo button is block and the left side wheel below the left button does not move the camera up and down.
Thanks

 

[Steel63]

Sorry can't help with that someone should be able to help you! Greatings from Florida

 

[Jay241]

Welcome to the forum, enjoy and good luck!

 

[old man mavic]

welcome to the forum ,not quite sure what you mean (unlock my gimbal)

 

[PanamaMike]

Welcome to the forum, from the Republic of Panama!

 

[anotherlab]

Welcome aboard Al_Fly_Aviator and greetings from Albany, NY!?

Can you be more specific about the problem with your gimbal? It doesn't lock or unlock from the remote control.

 

[Thomas B]

Welcome to the forum from the deserts of Arizona! Enjoy.

 

[eaglesurfing]

Welcome to the forum and enjoy.

Please share your pictures, videos and knowledge about your drones.

Did you look at the manual for your answer???

https://dl.djicdn.com/downloads/Mavic%20Air/Mavic_Air_User_Manual_v1.2_en_2.pdf

 

[Drone Master]

Welcome to Mavic Pilots! Enjoy the forum!
Can you describe your issue in more detail? Also what aircraft are you flying?

 

[Mavikhan]

WELCOME ABOARD!

 

[MA2 317]

how can i unlock my gimbal from a mavic air remote control

Hello from the Hoosier Heartland Al_Fly_Aviator.


If you're talking about the FPV selection that locks and unlocks the gimbal, it's in the settings somewhere in the app and not on the remote.

There may be an option to assign a Function button for gimbal tilt on the remote, but that is set inside the app as well.

Good luck and welcome to the Forum. ?

 

[dirkclod]

Welcome to the forum.
I hope you will find our site helpful and look forward to any input , photo's/video's you might post .
Don't be shy and ask anything if you can't find it by searching.

 

[mrjohnc1]

Welcome!

 

[Deleted member 133794]

Welcome and enjoy ? from the ??

 

[wjkrysak]

Welcome to the forum. We look forward to your participation and view of the world. As you can see, there is plenty of support. Do a search and folks will find you.

 

[Al_Fly_Aviator]

Welcome aboard Al_Fly_Aviator and greetings from Albany, NY!?

Can you be more specific about the problem with your gimbal? It doesn't lock or unlock from the remote control.

The function button C below the photo button is block and the left side wheel below the left button does not move the camera up and down.
Thanks

 

[Laborous]

Welcome to the forum from the beautiful woods of Maine!

 

[Chetk7677]

Welcome from central Florida.