Recent content by afastboy

Still shows 0.00.0000, I’ve rolled back my firmware with 100% success but still shows 0.00.0000, flys great no problems so I left it alone.

yeah,ive tried every possible combination but constant failures.

Well I guess I'm just the fortunate one to have one of the only mavics stuck on 00.00.000 firmware. ******** that I will end up having to return this so I can possible update in the future to some possible worse firmware then I have now.

Flys fine but update failure to AC.. RC updates to whatever firmware I want but AC is stuck. I've tried everything, I have all the gear for doing a battery mod but I'm stuck with the difficult choice of sending it back or just staying with whatever firmware it's currently running on and never...

Same here, modded battery with 1800mah turnigy bolt, less then stock flight times.

Dji mindy on the dji forums pushed the update to my account through assistant 2 making it one of the firmware versions available for downgrade.

My Mavic is stuck on 00.00.000 firmware, flies fine.. RC will update to any of the available versions inside dji assistant2 but Mavic fails every time. I've tried everything even the .350 firmware and again only the controller updates and the AC fails. This is my 2nd Mavic after loosing the 1st...

Lost my Mavic with a single 1800 Lihv strapped to the back last Saturday due to dead iPhone then 10% autoland, started returning home at 12% from 1600' distance but went into critical landing at 550' from my home into very dense woods. I did my best to make the #'s on the Mavic controller get...

Is the c rating to high? Maybe why so much is left in the pack? 65-130 c rating.

Before flight After flight down to 10%

So when modding the battery itself, I can't get any extra time from the external 1800 I'm running.. something's up because I modded my second dji battery and I'm having the same results of no extra flight time. With my modded phantom 4 if I didn't unplug the externals before turning off the...

Full 4.35

By the way I did sever one wire on the balance connector on the factory pack while cutting open but was able to re-solder, battery had several flights without external battery to verify all was well.

Everything looked normal. It took 1063 mah on recharge so no way they were burned down to 7%. A little bit of wind yes.

So heres my problem, pretty basic, connected red to red, black to black, showing absolutely no flight time improvement running a Lihv 1800 Turnigy bolt. Expecting upwards of 30mins I got only 19min flying down to 7%. I checked the voltage through the connectors separately and both the stock...