Recent content by Anchoy

Until the Dec 21 update of the DJI Fly app (iOS), it was possible to connect to the Mavic 3 Pro drone and transfer/delete photos and videos without powering up the remote controller. After the update, it's necessary to power the RC. Which takes more time :( Is it just me?

That's the thing: Most of the time the RTH option is there. I have the latest firmware. Some have suggested the drone might be too close to the home point in these cases. I'm going to look into this.

Good suggestions. I will look into this!

I've never checked a flight log, but I will do it to see if it sheds any light. Thanks!

I have to admit, although the RTH option disappeared from the RC screen display, I didn't try pushing the hardware RTH button on the controller. I will try this next time. Also, this is when the drone is still 500-1000 feet away, so there was no warning about an unsuitble landing spot. (I just...

You raise a good point. Just because the option disappears from the RC screen doesn't mean it won't work. Next time the option disappears from the screen I'll try pressing the hardware button to see what happens.

This happens sometimes when the drone is 500 to 1000 feet away from the home point.

I have read the manual. I'm standing about 3 feet from HP. I haven't moved.

I always wait for the "Home Point Updated" message before I launch my Mavic 3 Pro. When I want to return to home, the RTH option appears on the remote controller screen as expected most of the time, but 10-20% of the time, the Return to Home option isn't there and I have to choose "Land" and...

I am creating the mission as I fly, but the thumbnails still don't get created... Could this have something to do with SD cards? I'm currently not using them. Only the M3 Pro's internal storage.

In most of the tutorials I see online for DJI Waypoints, every time a waypoint is added to a mission, a photo thumbnail of the camera shot is created. When I create Waypoints missions on my Mavic 3 Pro, no thumbnails are created and each stop on the mission look like generic map icons. Anyone...

I have a similar problem. Most of the time it just opens the file. I have to tap it just so to edit the name. Is there a trick to this?