Recent content by Andris

I chime in too with my story: I have got a Mavic 2 Pro from a customer that he told me after a crash it cannot recognize the battery. It says battery signal error, etc. The drone cannot see cell voltage, remaining time, cycle count etc. He had 3 batteries and with every battery the problem was...

The header seems to be the same but maybe inside it is scrambled then.

@BudWalker Thank you for clarification! Now it works as intended! Do you know any info about opening the Mavic Mini 2 DAT files?

Thanks for your attention. Acually I tried to use csvview to process the dat file but it says "Unrecognized log file /Users/Andris/dji-tools/fly.dat" So first I run datcon to get a csv and event log separately and then I feed the csv to csvview. This was I cannot open the eventlogplayer...

I figured out that if I export a csv from datcon with the option "Show units in column headings" unticked, I can see lots of extra fields because the definitions are without units. Just a tip if someone sees this topic.

I further analyzed the issue. I attach a new screenshot. In the picture you can see that the baro and the gps height readings are going together. So if I am correct the problem is not with the GPS or the baro. However I see that the acceleration on the Z axis is going up and down rapidly...

Thank you @slup! I found some interesting part in the graphs also: I can see neutral position of the throttle stick but relative height goes up and down. Also the height_ctrl error shows up in the log too. What was your conclusion about this issue? Processor on main board or IMU module? (I...

@slup Where can I view the dat log event list in a log file? (I know csvview, datcon, extractdji, etc tools but I think I am missing a tool :) )

So it looks for specific header columns? (As far as I can see in the provided files the header column names are almost matching.)

I created a csv file with the djiparsetxt program (Documenting the Format of DJI Log Files) It is readable in any text editor program but csvView cannot parse it for some reason. I checked the file and the first line is missing the sep=, line. However after I add the line it still cannot parse...

Any further update on this issue? I am experiencing the same :(

I accidentally left the propeller cage option enabled and experienced this same vibrations. After turning it off, it was good again. I think restoring the firmware also turned off this option for you :)

The parts you need is available from eBay now. Original DJI Mavic Pro Drone PTZ camera signal line cable transmission line Flexible Camera Gimbal Flat Ribbon Flex Cable Phantom Suit For DJI Mavic Pro | eBay I ordered a few to test them.

The part you need is available from eBay also. I order one to test it with my broken Mavic Pro. Original DJI Mavic Pro Drone PTZ camera signal line cable transmission line | eBay

He was just referring to a Fawlty Towers (a British comedy) character :)