Recent content by brunosardao

i contacted the store, so i will wait for dji and also the store feedback! Will let you know how it will turn out!

I think the seller did as you are saying, reported a flyaway, got a new drone, was able to recover the flyaway drone, and then sold it in its original box without the RC to another store, that may be ou not the store were i bought it from. Its a German store, and all the drones they are selling...

Hi there, I've bought a mini 2 from eBay as faulty, it hade a broken gimbal witch I managed to repair and came with its original box and without the RC. Since I have a Mavic air 2 I knew that I could use the same controller with the mini, but when I first started the drone there was the...

hello again, finaly got it working, picked up the original core board again, and i used the heat gun to give it a bit o heat to some areas, turned out that after that i assembled it back againd and the fan started to spin and the stattus led/button was working again, so now i can connect again...

hello, so i got anoter mavic air, was boght has water damaged, i have cleaned it very well and was able to swap the core board from my maine unite, the water demaged core board works, the fan spins normaly now, and i can now pair the drone withe the phone or remote. Now im having 2 errors, one...

Yes, I already checked, but I will double check and see if it's ok.

The IMU error after I got the drone I just tried to connect the drone and it just worked, and I was able to do a 14 min flight without any problems. And even the IMU wasn't reporting any error. After that started all the problems and I opened the drone, there was only a small amount of corrosion...

I have made some testes by trying to disconnect some of the sensors, like the front and back sensors, and also the IMU to see if I could at least connect it to the RC, but still won't connect, the only difference that I had was the status led started blinking green yellow and red in a loop...

Yes, same thing with or without it.

Yes, I have downgraded to a previous version but then I can't connect the rc to the phone, updated again to the latest version but it's the same, I think the remote is fine, I was wondering if I downgraded the AC firmware if it could do any difference but the problem is that I can't downgrade, I...

The part were I can't proceed is when you have to press/hold the the status button so it has to beep once or twice according to the connection method you want, the drone just doesn't beep. I had it pressed almost one minute and nothing.

Hello there, bought a second hand mavic air, it was stated that it hadn't had any crashes and was working good until it developed the IMU error, at the beginning it seemed an easy fix, I got the drone, was able to connect it right from the beginning, and even made a 14 min flight, next day I...

Hello there, could you help me, I think I have the same problem, my fan doesn't spin, and I got solid red status led, the fan will start spinning after the motherboard gets to hot!! Can't get it connected to the RC or phone, since I can't use the status button to change it's connection type.