Recent content by ClaudioNC

No, once again you're guessing wrong, both because you call it an attack, which is rather ridiculous, and because you think I should feel better. Maybe sometimes you do this and feel this way when you do it, not me. Not at all, and now I feel even worse seeing that you still don't understand...

Wow, I have to stick to the facts too, in this case to what I read here in this post. Man, you are really rigidly stubborn, you wear DNG-branded blinkers and you can't see, imagine and accept anything else! But if this style completely satisfies you, if you don't recognize the usefulness of...

Hey man, why instead of recording only the DNG, don't you activate both, DNG+JPG, in each camera you have, grounded and flying, if possible? I ask you this without winking... 😐 It's a lot useful to have available, in any photographic catalog that you are using, or you could use in the future...

Bravo, great consideration, clarification was needed, many people would never have understood this. Inspire 3 is not an amateur drone, it's a Pro level system! While the Inspire 1 Pro is not/was not a Pro drone and the same for Inspire 2, because both priced for a lot less... are/was less...

Yeah, and before reading you, I have added other considerations to my initial comment, please read it.

Again and again...! For years. DJI Mavic 3 has NO ZOOM lens! It has 1 wide angle and 1 tele lens. That's all. Defining it zoom is a blatant falsehood. It's a statement, which almost everyone likes to parrot, it is a marketing operation that deceives the naive ignorant user who knows little or...

Ha! Comic... Standard cameras. Ground cameras usually stay on the ground, they are hand held or put on a tripod, they don't fly in the air, unless they are installed on a drone! And the conditions of use, the limits of use and the needs are objectively very different in the two situations. I do...

Optically, not physically. But from the shots I took, in the two flight tests and at ground, my M3 creates (in Jpg) very detailed photos almost on the entire frame of the 4/3 lens, maybe few mm on the corners are just a little less crisp ... maybe. The whole frame is crisp for the tele...

I have dozens of DJI drones and also some Autel EVO II. None of the DJI cameras I have are blatantly out of tolerance. Noone of the Phantoms, and Mavics. Even the DJI branded 15mm lenses (made by Panasonic) for the Inspire 1 Pro and Inspire 2 are perfect. I found to be bad the Olympus pancake...

No need to be realistic here, but just understand the meaning of what I have written, very clearly. Of course you didn't get it. Incredible!

Ok, thanks, nothing of new, this is obvious and well know, I hope. I have wrote: There are situations in which it is more important to have the possibility of keeping the weighted drone in flight for few more minutes. A few more minutes is not the double of the flight time, that noone can...

Perfect camera here obviously means a perfectly built copy, man, i.e. not out of tolerance, not out of the spec of its optical design!

It is certainly not the aluminum part of the motors to worry about, but the magnets glued inside these motors which, beyond a certain temperature, begin to lose part of their magnetic properties, their strength, and the allowed temperature is not high. Neodymium magnets just above 80°C already...

Modified Mavic 3, with two batteries connected in parallel.

The reasons for wanting to increase the operational flight time as much as possible go beyond the obviousness you wrote (...30 minutes of flight time you will be amazed how long that is). There are situations in which it is more important to have the possibility of keeping the weighted drone...