Recent content by Faquaral

Ah yes it's quite obvious now sadly. If only we could lock the scale, that would allow for at least visually consistent mapping, as sometimes radiometric processing isn't necessary and RGB would be enough just to spot various things/problems etc. I will try my hand at reality capture yeah, seems...

It's curious I don't really see much of a difference between the two images you attached, actually they do look exactly the same but yeah I agree with you and it's definitely an issue to be aware of when processing RGB. Yes the conversion software is still available, still in beta though but...

Very nice looking ortho, very nice I wasn't aware reality capture was able to do ortho, let alone such nice ones. Good job and thanks for sharing It's frustrating that it isn't radiometric ortho though! Since we can't lock the scale on the M2EA, I guess these kinds of ortho may be affected by...

For the flight we used settings as you suggested: 40m AGL (138ft) 90% overlap front and sides 100% Nadir images DJI Pilot camera type: M2EA thermal Photo mode timed interval shots Don't remember the flight speed but very slow, total flight duration was around 40min 472 thermal images in total...

So we finally managed to get a flight done and thanks to your input were able to get a good dataset that did stitch in Pix4D rgb mapping Then after converting the files to rjpeg using the tool mentioned previously and the camera calibration data from the rgb processing, we successfully...

Thanks I will report back when we have done the flight and tested on Pix4d 👍🏻 Weather is currently stormy around here so we have to wait… 🙁

Thanks a lot for your input and sharing your research, definitely interesting to know that it works out of the box with DroneDeploy, though not very accurately yet. How high above ground were you flying for this particular dataset? DroneDeploy makes a mess of our images, so there really is a...

Many thanks for your reply! I'm getting somewhere with the stitching now in rbg map, though with the help of a few manual tie points. It's still not perfect probably not quite enough overlap but still I'm glad it works Regarding the map not being actual thermal but rgb, plus with no lockable...

You got some very nice results there! We have tried to process in Pix4D too but with no success, it just won't stitch Would you be ok to share your tweaked camera profile settings? Thanks!