Recent content by GravityRZ

i believe only if you applied the hack first, then did the upgrade if you only checked if the hack is still active(ADB is still running), did the upgrade then i believe you can run the hack instantly again. the 2 hour waiting time is the time between executing the hack the first time and the...

so the option to set the controller to manual frequency selection is gone? that would be strange because that option has been there forever. i would expect that the controller still can be set no manual frequency(2.4 or 5)

indeed you need to modify the controller to add external connectors. lot's of video's on youtube however i do not think an $549 alientech external antenna will bring that much improvement. adding extenal antenna's and applying the fcc hack will give you a range of 6-8 KM's without line of...

strange. it looks like they enabled it by mistake on 1300 and then figured out that this was not intended and disabled it. if this is the case then the people who made the fcc hack might add it to a new version of the hack can you try to set the transmission to manual(eg 5ghz) go out of the...

do you mean you can not change the channel frequency(2.4 or 5.8) manually or do you mean the manual channel width(10-20-40mhz) can not be selected anymore

ok so 1300 firmware was intended so that the app could be updated independently of the firmware of the controller and what do they do. build a new 1400 release with a new app version 1.13.1

they will probably fix it the same way as the 0400 procedure but with a different file to replace regarding the mini 3 pro and mini 4. they are not that different and drone shadow/ar homepoint will not increase the workload that much. maybee they will wait until they have sold enough mini 4 pro's

i think that powerbank can does max 140W per port or 100W+140W for the 2 usb-c ports the usb-c ports do power negotiating following the PD3.1 standard. so it asks what the max voltage is a batterycharger will accept PD chargers negotiate which maximum voltage/current can be supplied. in this...

i currently use the rc controller with external HX-link antenna's i am thinking of adding 1 Alfa M25 antenna for better long range signal the left antenna does RX/TX The right antenna does only RX what would be the best setup alfa left HX-link right (alfa for RX/TX) or alfa right HX-link...

i do not think this is a problem. the hack is only on the rc controller. the drone itself does not have anything to do with this. my drone is still on 0600 but the only reason for me to upgrade is if the fix something serious or if they implement AR RTH feature. 0700 did not fix anything and...

and if you keep on reading you see another google drive link some guy doing an FCC hack permanent for RC pro Controller

look at page 65 of this thread

current fw 0100 with patch 1.4 active run dji assistant 2 to confirm there is a good connection between controller and computer(Rc controller recognized) exit dji asisstant run check_adb adb not running run djifcc (v1.5) fcc patch completed succesfully run check_adb again adb running run dji...

better google before you upgrade your firmware. i have read somewhere that this 120m limit will be enforced on the M4P since it is C0 from the factory M3P is not C0(but falls in C0) and did not get this limit i also have read that M4P owners get the choice to remove the C0 label if they do the...

as far as i can tell the new version can now install the fcc hack even when you are on a higher fw version and did not install the fcc hack before i think halvway the proces it downloads a hacked firmware 0400 which you need to copy manually to the right place