Recent content by Gstudio

I checked again and you're right, the capacitor on the motherboard also came off with the glue... So the motherboard is damaged. I should have heated the glue before removing it; I didn't think it was hard enough to take out the components.I don't think the missing capacitor can be resoldered...

Yesterday I received the replacement IMU and installed it, but the problem persists. Upon closer inspection, the previous component was damaged due to the capacitor accidentally torn while removing the glue. The new IMU I received (it's not new, I can't find a brand new component on the...

Yes, that's it. I noticed it after the previous posts. I had magnified the IMU with a microscope and could see a missing component. Sure enough, when I removed the glue to disconnect the ribbon cable, the capacitor also came off. I was very careful when cutting the glue around the ribbon cable...

Maybe pairing, yes.

During the last flight the only problem was the camera no longer moving, everything else worked. I was in a place between two nearby buildings, and I didn't have a good GPS signal, but I managed to arm the motors and raise the drone until it locked onto the satellites, so it was perfectly stable...

I had tried the calibration outdoors too, the satellites are detected without problems, but the IMU calibration does not work. It could be a problem with the accelerometers.

Sorry, but maybe I didn't understand a couple of things: Can I calibrate indoors? In your answer, do you mean I should calibrate outdoors, away from metal and concrete? It's just my problem interpreting the translation of the sentence... In previous attempts, the battery was 90% charged. The...

Mavic Mini 1 IMU Calibration Problem After noticing the gimbal connection ribbon was cut, I purchased a replacement. When it arrived Friday evening, I set to work, disassembled everything, and, without any particular problems, removed the old, damaged one and connected the new one. I dusted...

I have Pro version, many features are not compatible with Mavic Mini. I wrote more than 4 times to the support but no answer. Doesn't work: - Mantain terrain distance - Cinematica - In automatic mode when I create a vertical grid it doesn't work anymore (it's very useful to take frontal pics of...