DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Recent content by Henfri

  1. H

    Gimbal Error 40002 - but Movement during startup is normal

    I refreshed the Firmware via DJI Assistant. Is that the same?
  2. H

    Gimbal Error 40002 - but Movement during startup is normal

    hello, I moved the gimbal around all three axis while blowing air towards it. Without success. Any further ideas? Greetings, Hendrik
  3. H

    Gimbal Error 40002 - but Movement during startup is normal

    sounds interesting. Do you have a link with instructions for me?
  4. H

    Gimbal Error 40002 - but Movement during startup is normal

    My son says: No...
  5. H

    Gimbal Error 40002 - but Movement during startup is normal

    Thanks for your reply. I did not use Can Air. But I want to did not blue out any dust yet. So I will give that a try. I old to did not work on the gimbal. So I suppose next step trying to blow the dust out and if that doesn't work to Open it? It would be so much nicer if the Drone wood give...
  6. H

    Gimbal Error 40002 - but Movement during startup is normal

    Hi, the Gimbal moves normally during Startup-Sequence. However, in the app the Gimbal-Stuck message pops up. Also, when flying, the Video is shaky. When moving the Mini on ground, the gimbal does not seem to stabilze. It remains fixed relative to the drone. Up to now, I: - refreshed the...
  7. H

    Fly-Away into Wall - I was 2 meters away and could not stop it

    ... I think that what I posted there defeated the theory of "everything worked as intendet", no?
  8. H

    Fly-Away into Wall - I was 2 meters away and could not stop it

    Hello, I tested the braking today and indeed it is less agressive than I though - but still I would claim (also checking with an independent witness (my son)) that it was unusual and like in slow-motion. Still I think that the full back stick should have been more than sufficient. Then, I...
  9. H

    Fly-Away into Wall - I was 2 meters away and could not stop it

    And do you consider it normal, that with full back stick I cannot stop from 2.3m/s within 1.7s? That is 0.13g - peanuts. Yes, I realize that. Whenever an aircraft crashes, you find people saying that the engine was burning. So, let's stick with the numbers ;-) Should the drone not stop when...
  10. H

    Fly-Away into Wall - I was 2 meters away and could not stop it

    Hello, thank you! Elevator? Was I in plane mode? You should have seen it. It looked like slow-motion. Also the pitch hardly changed. Normally, when you make full aft stick, the pitch changes to maybe -30°. Optically, this was more -5°. Really, if you would have stood beside me, you would...
  11. H

    Fly-Away into Wall - I was 2 meters away and could not stop it

    Yes, that is in line with my observation. However, the drone was moving forward slowly. maybe 0.5m/s or so. Full back stick, in front of a wall (i.e. no wind from aft) should stop the drone in no time, no?
  12. H

    Fly-Away into Wall - I was 2 meters away and could not stop it

    Ah, my apologies... I had uploaded the log with my post, but must have made a mistake. However, the hint of using Airdata is good for privacy: Please let me know, if you need the raw data. Thanks for your help, Hendrik
Want to Remove this Ad? Simply login or create a free account