Recent content by Jorge Vergara Latoja

Hello. If you have already tried to calibrate the optical sensors and it does not allow you to advance in the calibration... I suggest you observe if, at the time of calibration, you can see the image that shows the online images of both sensors on your computer screen. ? If it shows you both...

Hello, I share your opinion too. I have been piloting drones for more than 10 years, I have my UAV operator's license, and I have never had an accident with my drones, (Inspire2, Phantom 4Pro, Mavic 2Pro, Mavic 3) If I use protectors for the camera, due to the possible glare of the lens...

Excellent information that you provide...we must always consider factors that will influence the performance of our batteries, ambient temperature, wind speed or gusts depending on the height at which we fly, time, sky condition, clear, covered or cloudy etc... some environmental conditions will...

The tests you did on your Mavic 3 are interesting…about the batteries…I think very few of us have bothered to time the actual flight time of their batteries…now keep in mind that DJI always takes refuge in the characteristics of the batteries of their drones..."the flight time was carried out in...

Thanks for responding to my comment. I also have an M3 with RC Pro. I knew that this drone comes with that Remote ID system, but I didn't know how to check if it is actually enabled on the drone, it seems to me that the App on the RC pro allows you to activate or deactivate this function, I'm...

I think it's a very interesting test to do. The ideal would be to do it with a recent drone that has the RID incorporated and with a drone that has been updated with a module with RID to see if they behave in the same way with the location update in the Drone Scanner App, for example. Very...

Hello! ..Very interesting what you say. Something is not clear to me, from what you say about using an Android device, it must have some special feature.? Can a tablet or smartphone be used with the Drone Scanner App to verify this? I imagine that this App is not for Apple... am I right? I'll...

Hello. Very true what you say. You have to be very careful with the batteries, both with the drone batteries and the RC battery. The RC battery does not have much complicity in changing it. In fact, there are several videos on YouTube that show the entire process to be able to do it safely...

I understand you, but I based myself on what he was arguing about seeing options for how to recover his battery. I fully understand the care that must be taken when handling lipo batteries, I also had my apprehensions about this method to "recover" the battery. I personally have done it and it...

Hello, I understand that you cannot update the battery firmware because it asks you to have more charge. You say that you are seeing the option to charge the battery manually, so I deduce that when charging it on the charger, directly on the charger or on the hub, the battery is not charged, it...

Hello...Unfortunately these marks are caused by the gimbal protector, since it is in contact with the upper part of the camera...and it does not have padding or plush to avoid these marks...it is totally normal...

I congratulate you.!!!..It is gratifying when you are the one who performs this type of repair on your Drone. Congratulations.!

Hello.! In the DJI Go4 App in the battery section, (click the 3 dots in the upper right corner of the screen) and it will go to battery, there you can see individually the charge status of each battery cell, normally you could there is a voltage difference between the cells of no more than 0.5...

In the configuration of the C1 or C2 buttons, it can be configured so that the proximity sensors are "turned off" while this previously configured button cancels the operation of the sensor, it does not narrow the field of action of the sensors, but it deactivates them while they are activated...

Hi…If you are a DIY enthusiast you could do the following; remove the bolts that hold the lower cover of the Mavic 2 and lift it carefully so as not to damage the Flex that connects the leds to the plate... and check if there is any damage to it, sometimes the sensor connectors come loose due...