Recent content by lannes

I'd be looking at the new Epson BT-40s or a secondhand pair of Epson Bt-300's which will work with the P4p and M2P running DJI G04

I'm using this setup with my BT-300's connected via hdmi to the Crystalsky running Litchi flying the Mavic Mini, so it should work with DJI Fly on the SC as it just displaying the hdmi feed on the BT-300's. I like this solution as you don't have to control the app from within the BT-300's...

If you have another earlier model post 2017 DJI drone, most of the remote controllers are supported by the DJI Flight Simulator.

Have you tried the "physical button" method of pairing, it's 1:24min in the video ?

I always fully charge/ top up everything the night before I go out to fly

You would see error messages in DJI Fly if there is a gimbal problem, either on start-up or during flight.

As with many tablets the newer Ipads still struggle with sunlight screen visibility, so you'll need a hood of some description. I've been testing the Ipad Air 2020 (4th gen) model with the A14 bionic cpu and it's been flawless with DJI Fly, so I'd recommend this model but the price is getting...

The sensor calibration is a bit temperamental it works better with the screen set to a lower resolution e.g. 1080p

Your getting this message because your PC is not recognizing that you have connected the MA2, there is a problem with the usb drivers on your PC. The other thing is when connecting have you powered on the drone ?

These are pretty light https://www.specialized.com/au/en/turbo-creo-sl

If your based in Europe the BT-40 has been released, the 40-S has been released in Japan so it will be very soon. You've got a bit of a decision to make, but wait until the solutions have been tested. I suspect number 2 will be cheaper. 1) MA2, SC and BT-40 or 2) MA2 and BT-40s

I'd say it would be much or a muchness

Make sure to get the DJI refresh for a total loss

Direct solar charging would take a long time