Recent content by rmatile

Thanks Flycaster Before I answer all the questions, and as a side note, 7-8 months ago I did get the Litchi version I refer to below (4.3 Beta patched 1866), working just fine (with some significant fiddling around per comments below) with Moverio BT300’s, WITH Google mapping, WITH my Phantom 3...

Flycaster After closing the Go4 app, and or starting initially with the Litchi app (without opening Go4 app first), I cannot connect the drone to the glasses with Litchi. The Litchi app says "disconnected".... YES!!!....I totally get that...I was led to believe it worked, by someone who I found...

Thanks Flycaster....I have the RC1A controller...I didn't even know there were 2 versions! The apk is a beta version, that supposedly worked based on a previous post on this thread. com-mod-litchi-for-dji-mavic-v4-3-0-b1866-beta-patched.1866.apk

I have NOT found a way to get my BT300's, Mavic 2 Pro, and Litchi working together....quite frustrating, and the Moverio glasses just continue gather dust in the corner of the room....one of my top 5 in bad investments in my life....could have bought a lot of fun "stuff" that works with that...

Thanks...I'm probably splitting hairs....and I know it....when I see that they've allowed us to adjust the P3P to self discharge at our choice (from 3-10 days) but don't have the option in the M2P.....just makes me wonder....and sure...maybe holding at full charge for 10 days doesn't materially...

I have that charger....and I don't think its operating properly....takes hours to charge on one of the ports.....and there was a couple of other things as I recall..that I couldn't pin down, because at the time I had just expected it to work right. I haven't needed to use it much, so I've...

Thanks Raylo32, I guess that's my bottom line...after a flying session, it seems like I always have a pack or two below storage voltage, or above storage that needs attention. And I know I won't be flying for a week or so....so to protect battery life, I was looking for a device that would...

Thanks "With the birds" I use the cell voltage for monitoring and determining the best storage.....and also when flying, for avoiding the lower "safe" voltage limits. Other than that...That's about it. As far as RSOC, as I've never seen the algorithm, and I probably wouldn't understand it...

OK...I was curious, so I discharged the packs for both my Phantom 3 Pro, and my M2P. I did this by flying in my garage to discharge them...just a couple of feet off the ground, let them cool off and I documented the readings....now I'm going to let them sit for 10 days...or so, and look at them...

Looks like I should re-visit the recommended storage voltage for these packs......thanks for the link johnmeyer

Its funny that you mention that....I've flown rc planes with nicads (yep..I'm that old), and even used nimh for the trans (and some flying) in the old days..... When I changed over from brushed to brushless motors, I changed my fleet of planes all to the lipos. I've always used around the 3.8v...

Is there a M2P battery charger/cycler out there? When I fly, I try to be ready for a complete flying session, with the plan of depleting the 4 packs I have. Invariably I don't/can't fly the 4 packs totally out.... I'd love to have a charger and cycler that could take a battery, and discharge...

Can anyone confirm that someone...ANYONE, has Litchi working with their M2P?

For me, yes....the 4.3 (beta as I recall) works with my Phantom 3 Pro....but NOT my Mavic 2 Pro. I couldn't find where you posted what drone you have....

Hey there KSM (all)...I'm using the 4.3 Litchi version, and it works great with my P3P, but NOT my Mavic 2 pro....With the M2P, I get everything EXCEPT video feed....I can control the gimbal, the mapping works...but no video feed. Have you got Litchi working with the Mavic 2, and Epson...