Recent content by Rodzilla

I purchased the 2mm and 5mm foam sheets at the local Hobby Lobby. I got the 7mm on eBay. Good luck!

I love my case set up. It was fun to come up with it and make. I like tinkering and designing things. Though not cheap, it certainly is strong, nice fitting and sleek.

I use a Lowepro DroneGuard BP 250. It's not cheap at $150. But I feel it's worth every penny. Plenty of room for everything I want to carry, but not too bulky or large.

Customer service told me to send it back. They will not send me a new unit in a new box nor will they guarantee the next unit they send will be brand new. At this point I'm done. I've given up. I will keep this one. I've tried some different camera settings that seemed to help. DJI's service...

I got replacement number 5 yesterday. Opened up the box. I did not get an new product box and the Mavic they sent me was a used one. Complete with the previous owners Micro SD card (with his video), damaged prop, and his settings (the Mavic was named DRUID). The gimbal works okay, but I'm right...

Update: Number 4 started doing the gimbal same stuff again. So, this one is going back. Onto number 5. Note: I offered to pay the difference for a Mavic Pro Platinum if they fixed the gimbal issues on the newer model, but that was a no go. You would hope they worked out the kinks with the...

I have a local Hobby Lobby that I got the 2mm and 5mm from. I got the 7mm from eBay. You should be able to get it all from eBay or Amazon. Good luck.

Well, I got in some flights in. The gimbal was still drifting at start up, so I tried something different. What I ended up doing was to recalibrate my remote control joysticks. It seems to help a lot. I'll give some more flights and see if it hold up.

I just finished this case for my PolarPro Mavic filters. I bought a Pelican compact memory card case on Amazon. I used 7mm and 2mm foam for the filter holder section and 5mm for the lid. I cut out the holes with a 3/4" to 1/2" copper pipe adapter that I sharpened on the inside. I used a 3/8"...

I just finished this case for my PolarPro Mavic filters. I bought a Pelican compact memory card case on Amazon. I used 7mm and 2mm foam for the filter holder section and 5mm for the lid. I cut out the holes with a 3/4" to 1/2" copper pipe adapter that I sharpened on the inside. I used a 3/8"...

Update: I got Mavic Pro #4 from DJI repair yesterday. They did not send me a new product with matching serial number Mavic. So, who knows if this is a new one. Also, the fact that I had to link/bind my remote (like all the other times) to this one makes me doubt they tested like I asked them to...

No. Still waiting for a replacement Mavic Pro. It's taking much longer this time. Maybe they are actually going to test it before they send it to me. One can only hope....

Yeah, I got the first Mavic on June 22nd and used that one for less than a week. Since then it's been the Mavic Pro shuffle. Seeing which defective Mavic DJI chose to send me from a pile of (most likely) refurbished or returned units. Customer service told me the replacement units are all new...

Waiting for number four to arrive. DJI sent me a email 6 business days ago saying that it had been evaluated. Since then nothing. I looked at online repair progress and no change in status. I did ask them to send me a new, tested and verified working one. Maybe they are still trying to find one...

Thanks for sending that to me. It's good to see they addressed the issue. Did you try the firmware update and did it work? I wish they had came up with that before I sent my second one back. That one had a great camera on it. I already sent that last Mavic back. They didn't immediately send me...