Recent content by steve2000

Here is the solution to my problem: I had a broken foot that I glued with superglue. Some glue got on the antenna and the coax-cable. The range is correct again, after cleaning the antenna. Thanks for your answers. rg

Hello DJI professionals, I only have half range with the Mavic Pro. The reason is definitely one of various crashes. What could be the reason? where are the antennas? Are those in the foot left and right? or are these just the WLAN antennas. Thank you in advance!

https://downloads.sourceforge.net/portableapps/7-ZipPortable_19.00_Rev_3.paf.exe?download

TRY https://dji.retroroms.info/howto/firmware

Firmware downgrade Platinium: Instructions / correct order: Bring with DUMLdore or DJI assistant to V01.04.1000. then to V01.09.7000 then return to V01.04.1000 without 305 and 306 modules Remove beforehand with 7zip. Then you have an open Mavic.

Hello, You have to disassemble the Platinium and insert an SD card on the motherboard. Only then it does work with the Frimware downgrade. rg

Thanks for your answers. Unfortunately, these never concern my question. I've now made my changes to the Mavic on Win7 and I just accept that it won't work on Win10 anymore. All of this could be erased because it's worthless ... Regards and have fun...

Windows 7 with the same Hard & Software works perfekt......

dji assistant 2 V1.1.2 launch normal, no fault but no connect. USB Drivers working. Yes the AC storages show up...

I know, how to enebled the Dev mode. That's not my problem. V1.1.2 work perfect under win7 for me. I know all things what I can do with the dev. Parameter. My problem is to run this V1.1.2. On winoes 10

It has nothing to do with my problem. But here please: I would like to set the parameter "g_config_takeoff_auto_takeoff_height" back to 1.2. Also the parameters: "g_config_control_avoid_atti_range" and "g_config_avoid_obstacle_limit_cfg_safe_dis" to original values. Because I have problems with...

Hello, the thread ATTI mode doesn't help me. I have very old Firmware on the Mavic. The combination Assistant and Mavic worked in past on Windows 7. I only can't get it to work on Windows 10. Any ideas else? best regards

It has something to do with Windows 10. When I still had Windows 7 on the same computer, the connection worked.