Recent content by vctech

Most likely a bug in DJI's code. We fixed a similar bug we had in Litchi recently, recent iOS devices have a 48khz native sample rate for the microphone and I am guessing DJI Fly's code expects 44.1khz like Litchi did

When you start the mission, it will ask you if you want to start from 1st waypoint. You can change it at that time.

It looks like you are looking for the following custom function: Orbit at Aircraft (Orbit): In Orbit mode, sets the radius and altitude from the aircraft location. Only works if the Orbit center is already set.

I mentionned the standard 360 photo sphere as it is the easiest one to do since there is a preset for it but other types of panos are also supported and all settings can be adjusted to your liking and stitched/shared without leaving the app.

With Litchi (iOS version), this whole process is as easy as basically 3 clicks! 1 click to shoot the sphere, 1click to stitch inside of Litchi, 1 click to share to FB. As long as you have iPhone 7+ or better, the pano resolution will be approx 100MP (14000*7000) which is the max that Facebook...

Litchi works on android 11

Within Litchi you can share the pano to facebook and it will show up as a sphere (better resolution when viewed on mobile devices). Alternatively you could just save the 360 photo to your device and view/share it in Google Photos which has a built-in 360 viewer. You can also upload the file to...

In the app, if you slide the "Photo Capture Interval" all the way to the left, then you should be able to disable it (both in the mission or waypoint settings). Some older drone models may not support this feature. Make sure you are on the latest DJI firmware.

Set the mission setting "Default gimbal pitch mode" to "interpolate", then Litchi will save the gimbal pitch too.

Check this video around 10:45: Litchi and DJI Go use the same waypoint system, so the same yaw jerking bug applies in DJI Go.

It's already there at the bottom of the camera settings. Alternatively use the 5D left button (default binding).