Camera not working

[georgerandelov]

Hello,
The camera on my MPP stopped working today. It shows red & blue horizintal lines. Camera does not respond to any command from the RC, neither zoom nor gimble.
Yesterday it was working fine.
If anyone has had the same experience and found a solution please let me know.
Thanks in advance

 

[old man mavic]

@georgerandelov just out of interest have you got a spare SD card to try in the drone, put it in and then do a format SD card with it in the drone ,please let us know how you get on if it works

 

[JohnnyD913]

Is the video cable bad?

 

[georgerandelov]

Is the video cable bad?

I do not know. The tool set is at home and I am on vacation. The suggested solution with SD card format, etc. did not work.

 

[georgerandelov]

@georgerandelov just out of interest have you got a spare SD card to try in the drone, put it in and then do a format SD card with it in the drone ,please let us know how you get on if it works

Hello, unfortunately it didn't work.

 

[PeterX]

Check all wires in and around the gimbal,may be one of them is ripped off or not fitted right on the plug.

 

[georgerandelov]

Hello, thank you all for the advises. On the third SD card it started to work properly. Strange enough two SD cards to be faulty...

 

[Little bird]

Hello, thank you all for the advises. On the third SD card it started to work properly. Strange enough two SD cards to be faulty...

See the old man was on to something. Good call. Old man.