"Disconnected" with something about Android Services

[NetDoc]

OK, my first problem was resolved, so let me explain this one.

I have the latest update on my Mavic Pro although it was doing this before I did. I start the drone in this order:

1. Start the controller
   • Wait till it displays "Connecting"
2. Start the Samsung S2 8 Tablet
   • The Go 4 app starts immediately
   • The tablet displays "Enter Device"
3. Start the drone
   • The controller connects in ATTI or GPS mode
   • Sometimes "Go Fly" appears (yay!) on the tablet
   • More often the tablet still displays "Enter Device"
   • It sometimes tells me I need to install an Android Information Transfer file

 

[mkp2020]

Try RC then Mavic then app - see if that helps.

 

[NetDoc]

Try RC then Mavic then app - see if that helps.

It's always on RC. Putting them on wireless is very limiting.

 

[mkp2020]

It's always on RC. Putting them on wireless is very limiting.

I mean try this sequence to power up.

 

[NetDoc]

I mean try this sequence to power up.

Ah... I'll try that now. Thanks.

 

[NetDoc]

That seems to work. I tried it 6 times and it failed only once. I think I fumbled something on that failure at that.