My first contact with waypoints and my brand new MAVIC 3 Multispectral drone and DJI RC Pro controller. First I´ve planed an area geometry mission where I can upload my custom geotiff dsm file for AGL terrain follow function. Now I will create a double layer mission like dronelink can do. First layer a normal single grid with 85% overlap at 90m, second a doublegrid in 80m and 75% overap. But the double grid not with 90 degree grid. The grid should be -10 und +10 from the first layer. I´ve tested this in dronelink, but I´ve no growth plan for my M3M drone to export this. Only for testing on browser.
So I must do this with a waypoint mission in DJI Pilot 2 app (I won´t install litchi). But DJI Pilot 2 won´t offer AGL, only ALT or ASL, so from Takeoff or from sealevel. I thought the waypoints missions are also with AGL. In Flighthub 2 there is no Mavic 3 Multispectral, but the M3E and there I can activate AGL? But without uploading a geotiff with precise data. Now I´ve found also this thread on DJI Developer:
sdk-forum.dji.net
It seams I can manipulate the kmz file? But DJI Pilot 2 won´t show AGL, so what to do?
So I must do this with a waypoint mission in DJI Pilot 2 app (I won´t install litchi). But DJI Pilot 2 won´t offer AGL, only ALT or ASL, so from Takeoff or from sealevel. I thought the waypoints missions are also with AGL. In Flighthub 2 there is no Mavic 3 Multispectral, but the M3E and there I can activate AGL? But without uploading a geotiff with precise data. Now I´ve found also this thread on DJI Developer:
