FIRMWARE FLIGHT STABILITY ISSUE!! 1.04.XXX

[kisto]

Hi guys i m a new user o mavic pro my previous drone was Xiaomi 4k, so at the first flights i m was trying to train my selft to make a manual orbit it is very important for me because i want to fly over the sea and to make some cycle from boats etc.. so at the first time a full charge the bateries and i made all the firmware update and calibrations : imu, compass, camera,sensor and after "my problem" remote control , so it is unable to made manual orbit and the reason is the mavic cant stabilizes the distance point after many trys (almost 5 bateries.. ) i made a experiment i turn the drone only right left continues with the right stick and unfortunatly i realized that my mavic is loosing 1-5 meter of the distance...i downgrade to 1.04.200 and again the same problem but with some settings of exp,sens i can keep my target but i have to push little forward in order to keep the distance stabilized this is my videos : 1.04.0300

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

1.04.0200

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

my previous drone of 300 euro...Xiaomi 4k

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

until now 3 person is confirm me the same problem have you got any idea???

 

[Lake_Flyer]

calibrate your sticks.

 

[ac0j]

Not sure why firmware/software changes would be your only attempt at correcting this. I never want to be the person that asks this, but.... Have you read the manual?

 

[kisto]

Not sure why firmware/software changes would be your only attempt at correcting this. I never want to be the person that asks this, but.... Have you read the manual?

yes i ve already read the manual the only settings about that is the stick calibrate (i ve already do 5 calibrations..) and the program dji go seems to read perfect my order when i turn left right..etc i m not a mechanic or programmer for this reason i post this in order to help me to solve it.. in addition to i now 3 experience mavic user with the same problem

 

[kisto]

has anyone else here try to do the same flight test with firmware 1.04.300 /200 (turn left-right the aircraft continues) in order to confirm the same problem? i think the most important of a drone is the stability. because this may cause many crashes which you can never prove it