3 GEPRC MOZ7 at Red Rock Canyon

[Paleomanjim]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[MARK (LI)]

Some of the best quality drone video I have seen...did you figure out that control stick warning in lower right corner that was in the first 30 seconds?

 

[Paleomanjim]

Some of the best quality drone video I have seen...did you figure out that control stick warning in lower right corner that was in the first 30 seconds?

Thanks, glad you liked it. The stick warning on the OSD seems to be an issue with lots of folks. Always goes away though

 

[Cafguy]

NICE DRONE!!!!! and nice Video as well! I love my GEPRC , I have a Cinelog25. they are Amazing

 

[GFields]

Another nice video!

 

[sarahb]

Why post such an incriminating video?

 

[Paleomanjim]

NICE DRONE!!!!! and nice Video as well! I love my GEPRC , I have a Cinelog25. they are Amazing

Thanks, crazy fun to fly it. This is my first GEPRC drone and it seems to be built really well

Another nice video!

Thanks again

 

[dave canada]

NICE DRONE!!!!! and nice Video as well! I love my GEPRC , I have a Cinelog25. they are Amazing

is this a drone youi built or purshased I,m rather new to fpv just wondering

 

[Cafguy]

is this a drone youi built or purshased I,m rather new to fpv just wondering

You can get them ready to go

GEPRC CineLog25 V2 HD O3 2.5

From progress to evolution, a comprehensive reconstruction of the previous generation of design. Finally we come to the Cinelog25 V2 version. This upgrade of Cinelog25 V2 has launched three video transmission versions, the most important of which is the O3 Air Unit video transmission version...

pyrodrone.com

 

[Paleomanjim]

is this a drone youi built or purshased I,m rather new to fpv just wondering

Here is the build video for my GEPRC MOZ7. If you already are flying the DJI FPV Drone or the Avata then you can use the DJI RC Controller 2 and the DJI FPV Goggles V2, or the Integra Goggles to fly with the MOZ7 which is already pre-built. You need only bind the Drone to the RC Controller and the goggles. Then before flying you need to program the Flight Controller with a program called Betaflight, which sounds difficult but is actually fairly easy. I show how this is done in the video. There are many other pre built drones out there as well that are compatible but you must purchase drones that have the DJI 03 system (PNP) already installed in them. The DJI 03 system includes a high quality camera that records as well as transmits back to the goggles and it also has the receiver that is compatible with the RC Controller 2. These drones also have RTH (Failsafe) as well as angle mode which is similar to Normal or sport mode on DJI Drones but less stable.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[dave canada]

so i can use goggles and my pv stuff with this drone thats really neat

 

[Paleomanjim]

so i can use goggles and my pv stuff with this drone thats really neat

Oh, and here is how the Failsafe works in case of a disconnect, very similar to DJI Drones RTH (return to home)

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[dave canada]

so i can use goggles and my pv stuff with this drone thats really neat

i want to say thank you I staeted some years back when introduced to a mavicusing a spark at start and litchi missions to search for elk sheds it ha ben a growing experiance for sure the fpv sheds new light on this for sure added with the other So I thank you it seems you have a good range and thats good and i attach marco polo to all my drones I tested it in -20 weather and found them to be goo for hard coubtry searches the longest was a 6 day search i did not search that whole time but it was on the 6th day i found it in a tree a simple adjustment before flight would have save me the trouble the drone tried so hard to make it homehttps://youtu.be/HtGP4rusZgA

 

[Paleomanjim]

i want to say thank you I staeted some years back when introduced to a mavicusing a spark at start and litchi missions to search for elk sheds it ha ben a growing experiance for sure the fpv sheds new light on this for sure added with the other So I thank you it seems you have a good range and thats good and i attach marco polo to all my drones I tested it in -20 weather and found them to be goo for hard coubtry searches the longest was a 6 day search i did not search that whole time but it was on the 6th day i found it in a tree a simple adjustment before flight would have save me the trouble the drone tried so hard to make it homehttps://youtu.be/HtGP4rusZgA

No problem. I have found quite a few shed deer antlers over the years and used them for Flintknapping billets, great tools for percussion and pressure flaking arrowheads. Using a drone to search for them is a great idea! Happy flying!