DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

gimbal cable replacement (after crash)

eddypanik

Active Member
Joined
Aug 11, 2018
Messages
29
Reactions
5
Location
italia
so... after crash...and gimbal motor overload... i deciced to start investigation (using youtube video as tutorial) i found gimbal flat cable or ribbon broken...
at moment waiting new one.
any suggestion on with glue to use to fix cable on arms and plug?
thanks
 

Attachments

  • IMG-20180917-WA0002.jpg
    IMG-20180917-WA0002.jpg
    36.5 KB · Views: 24
  • IMG-20180917-WA0003.jpg
    IMG-20180917-WA0003.jpg
    75.9 KB · Views: 21
  • IMG-20180917-WA0004.jpg
    IMG-20180917-WA0004.jpg
    76 KB · Views: 21
  • IMG-20180917-WA0005.jpg
    IMG-20180917-WA0005.jpg
    57.6 KB · Views: 21
  • IMG-20180917-WA0006.jpg
    IMG-20180917-WA0006.jpg
    118 KB · Views: 20
  • IMG-20180917-WA0007.jpg
    IMG-20180917-WA0007.jpg
    110.7 KB · Views: 22
  • IMG-20180917-WA0008.jpg
    IMG-20180917-WA0008.jpg
    93 KB · Views: 21
  • IMG-20180917-WA0009.jpg
    IMG-20180917-WA0009.jpg
    105.7 KB · Views: 22
  • IMG-20180917-WA0010.jpg
    IMG-20180917-WA0010.jpg
    144.2 KB · Views: 24
  • IMG-20180917-WA0011.jpg
    IMG-20180917-WA0011.jpg
    55.7 KB · Views: 24
part 2
 

Attachments

  • IMG-20180917-WA0012.jpg
    IMG-20180917-WA0012.jpg
    118.8 KB · Views: 12
  • IMG-20180917-WA0014.jpg
    IMG-20180917-WA0014.jpg
    135.1 KB · Views: 11
  • IMG-20180917-WA0016.jpg
    IMG-20180917-WA0016.jpg
    98.9 KB · Views: 10
  • IMG-20180917-WA0017.jpg
    IMG-20180917-WA0017.jpg
    44.8 KB · Views: 12
  • IMG-20180917-WA0022.jpg
    IMG-20180917-WA0022.jpg
    80.7 KB · Views: 11
  • IMG-20180917-WA0061.jpg
    IMG-20180917-WA0061.jpg
    33 KB · Views: 11
  • IMG-20180917-WA0062.jpg
    IMG-20180917-WA0062.jpg
    55.2 KB · Views: 10
  • IMG-20180917-WA0063.jpg
    IMG-20180917-WA0063.jpg
    51.5 KB · Views: 9
  • IMG-20180917-WA0065.jpg
    IMG-20180917-WA0065.jpg
    145.8 KB · Views: 9
i found on internet liquid tape (black)
but this is the one used on the connectors
still i cannot find the one used on the flat side of ribbon to fix on different part of gimbal
 
installation done, damper board and flat cable (ribbon) ... very difficult to put cable in correct way. any how... is working but... gimbal vertical movement is blocking in one position and only if you touch very gently with finger is passing that point... so i m not sure if my installation not correct 100% (is the ribbon doing to mouch resistance?) or some mechanical damage due to the impact.
i have no alarm at all , camera is moving ok all direction just at one point block.
also if try to do calibration (gimbal) is not passing 68% (same point)
when starting drone the camera is doing all normal movment all direction (i think becaouse thay are faster movement thay pass the point)...
i need to think next step...
 

DJI Drone Deals

New Threads

Forum statistics

Threads
130,599
Messages
1,554,262
Members
159,605
Latest member
petravka