Hi fellows. So I'd a crash the other day while flying very low to the ground. Overall, the device seems al right, i.e. no observable damages. My concern is the integrity of the gimbal, e.g. stabilization platform. May I know:
Qn1: are there any startup logs that I am able to review to definitively verify if there are any errors during the gimbal initialization?
Qn2: I took the Mavic out for (a few) test flight after the crash. I tried out some intentional erratic flight maneuvers (in Sports mode; which I trust still has gimbal stabilization. Maneuvers which I feel will surface defects in the gimbal stabilization, if any. May I trouble you fellows to take a look at both videos & let me know if the stabilization is still working fine?
Actual recorded footage:
3rd-person view of the quad (that was happening when recording footage above):
Qn1: are there any startup logs that I am able to review to definitively verify if there are any errors during the gimbal initialization?
Qn2: I took the Mavic out for (a few) test flight after the crash. I tried out some intentional erratic flight maneuvers (in Sports mode; which I trust still has gimbal stabilization. Maneuvers which I feel will surface defects in the gimbal stabilization, if any. May I trouble you fellows to take a look at both videos & let me know if the stabilization is still working fine?
Actual recorded footage:
3rd-person view of the quad (that was happening when recording footage above):
