DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Is This Normal For Osmo Pocket Gimbal?

johndoedoes

Well-Known Member
Joined
Oct 21, 2016
Messages
45
Reactions
5
When I physically turn the gimbal all the way to one side it almost touches the device. See the first image with the tiny gap.

When I physically turn it the other way it stops further away and doesn’t get close to touching itself. See the second image with the larger gap

Does everyone else’s Osmo Pocket do this? Any feedback would be appreciated!
 

Attachments

  • 49E5B1B9-05F6-4586-9D05-466689A22DA2.jpeg
    49E5B1B9-05F6-4586-9D05-466689A22DA2.jpeg
    838.9 KB · Views: 41
  • EAF39223-A9AD-46AC-82A1-DA91BCB1E708.jpeg
    EAF39223-A9AD-46AC-82A1-DA91BCB1E708.jpeg
    992 KB · Views: 41
Pretty much the same. When turned left it touches the gimbal holding arm. When turn right the gap is about 1/8" wide and camera side is parallel to the gimbal back wall.
 
Thanks for all the replies everyone!

Yes same here both ways
Thanks! Do you mean it stops the same distance on both sides?

Or one side goes closer than the other (just like mine).

Pretty much the same. When turned left it touches the gimbal holding arm. When turn right the gap is about 1/8" wide and camera side is parallel to the gimbal back wall.

Mine doesn’t touch, one side does get a lot closer to touching than the other...I would double check yours again if it touches or not.
 
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Forum statistics

Threads
130,600
Messages
1,554,274
Members
159,605
Latest member
petravka