Mavic 2 Pro Gimbal Overload Help

[lemonscented_ibex]

Hello,

My M2P has been having an issue where the gimbal will sometimes overload when flying sideways/rolling and stopping abruptly. The gimbal will first jerk slightly to do a correction when accelerating sideways, then it will jerk again when braking, this is both when I try to stop gently by slowly stopping the stick and when I stop by just letting the stick go. Sometimes the jerk will be fairly severe and it will cause the gimbal motor to overload and the horizon will then tilt to about 45 degrees.

Is the jerking when accelerating and braking sideways normal?

Any input is appreciated, if I can get some assistance I will try to get a video posted.

 

[sharkface]

sounds like a ribbon cable breaking. they are about 9-25 bucks off ebay.... may as well replace the rubber hanger while you're at it. if you can work on a cell phone, and watches? you can do it with a loupe eye piece. lost of helpful tips on youtube !