Mavic Pro firmware update notification

[JohnnyD913]

I recently updated my Mavic Pro with the
Latest firmware 01.04.0500

The problem is that EVERY time I go to fly I keep getting firmware update notifications.

I have updated 3-4 times with iPad mini 5 and iPhone 12.
I have also used dji assistance 2..

After all that I still get update firmware
Message..
Any ideas as to why?
Thank u

Drone Drones

 

[brett8883]

I recently updated my Mavic Pro with the
Latest firmware 01.04.0500

The problem is that EVERY time I go to fly I keep getting firmware update notifications.

I have updated 3-4 times with iPad mini 5 and iPhone 12.
I have also used dji assistance 2..

After all that I still get update firmware
Message..
Any ideas as to why?
Thank u

May need to update the remote as well. Connect controller to computer via side micro usb and connect to Assistant 2.

 

[JohnnyD913]

May need to update the remote as well. Connect controller to computer via side micro usb and connect to Assistant 2.

Thanks brett8883..
Gonna try it now!!!!
“ to be continued”!!
Lok Drone Drones

 

[Repaid1]

Thanks brett8883..
Gonna try it now!!!!
“ to be continued”!!
Lok

If not the remote, it could be different battery? Although all updates don't require a battery update...you will find out easily by labeling your batteries, always update with battery 1, then try again with battery 2...if nothing happens you don't have to move to battery 3 ...ect. This should be a set routine as you update.. Aircraft, batteries, remote, .

 

[JohnnyD913]

If not the remote, it could be different battery? Although all updates don't require a battery update...you will find out easily by labeling your batteries, always update with battery 1, then try again with battery 2...if nothing happens you don't have to move to battery 3 ...ect. This should be a set routine as you update.. Aircraft, batteries, remote, .

Could be batteries..
I will try that as well as remote
Update.,
Thank u Drone Drones

 

[Fizzbang]

I do not recognise the version 01.04.0500.

The latest versions I have for the Mavic 2 Pro and the Mavic 2 Zoom are Versions 01.00.0770 for the Aircraft
and the standard Remote Controller is the same number 01.00.0770.

Have you used Assistant 2 for Mavic?

If you do not get the Update Complete message and a green tick then nothing was updated.

01.04.0500 might be a no fly zone update.

 

[gppms]

I do not recognise the version 01.04.0500.

The latest versions I have for the Mavic 2 Pro and the Mavic 2 Zoom are Versions 01.00.0770 for the Aircraft
and the standard Remote Controller is the same number 01.00.0770.

Have you used Assistant 2 for Mavic?

If you do not get the Update Complete message and a green tick then nothing was updated.

01.04.0500 might be a no fly zone update.

It is the mavic pro 1, not the 2.

 

[brett8883]

It is the mavic pro 1, not the 2.

Did you try it out after upgrading the remote? I’m almost positive that’s what it is.

 

[keat63]

Is it actually a firware update that it's complaining about.

I've seen this message in DJIGO4 app a few times and whilst it says "firmware update", it's actually the geo fencing database update.
I've seen it at least two maybe three times in the last month.