Okay, I am new here, and pretty new with my drone, so if I screwed up, please be kind. A week or two ago it appeared I needed to update firmware. I went through the process, and it appeared to update the drone and battery as well. I have two batteries. When I next flew, I put the second battery in the drone, and I was prompted to update battery number 2. The update stuck at 70% and would not progress. I tried several times, and it kept sticking at 70%. I did a chat with DJI support thinking if I am within my 2 years of care refresh, they would help me out. I stated the problem and a "repair was opened - "Issue Description:Firmware Update Failure; battery will not firmware update it stops at 70%." They instructed me to ship the battery back and sent me a prepaid mailer. Sent it in and after receipt, I was told the "DJI Mini 2 Intelligent Flight Battery (GL) was malfunctioned,which caused charging and discharging issue;" with picture below. I am now being charged $55 to receive a replacement. I did not have any problem charging/discharging the battery, it was working fine except it would not update to the newest firmware. I suppose I am out the $55 to get another battery 2. I ordered a new one from Amazon which arrives tomorrow so I will have a backup battery. I see no reason to get the battery for the same price from DJI. My concern now is will this new battery need to be updated as well, and will it have the same issue with firmware. In retrospect, I realize batteries are a "consumable" and I should have just tried to use it till it died.