Need Some Help Please

nedcampbell · Oct 30, 2018

Here is a video I shot with M2Z and then edited in Filmora.I am not at all happy with the quality of the video - it's all pixelated and blurry.
I think I must be doing something wrong as I export and create these, but I'm totally (poorly) self taught.
Appreciate any advice.

neggy · Oct 30, 2018

you took the video off the SD card right?

What kind of SD card are you using? You need a FAST card.... one that will write at over 80megs/second Class 1 IIRC

nedcampbell · Oct 30, 2018

Yes off SD Card.
Samsung 64 EVO Select

WithTheBirds · Oct 30, 2018

nedcampbell said:
Yes off SD Card.
Samsung 64 EVO Select

Card isn’t your problem.

bushpil0t · Oct 31, 2018

what format did you export out of Filmora, 1080p or ???

Michael Gilbert · Oct 31, 2018

what are your video settings?

Mossiback · Oct 31, 2018

Could be the shutter speed was too fast. Are you using a ND filter? ND16 or 32 should be used on a sunny day. This would help smooth out the motion but would have no effect on focus.

Also, be careful flying into or under obstacles. Loss of GPS or RC connection has caused a lot of crashes in this scenario. Make sure your RTH is set to hover so it will not rise up into something if RTH is triggered.

CarlStarke · Oct 31, 2018

Agree with Mossiback, also try shoot during the golden hour when the light isn’t so harsh. Also try slow things down even more, tripod mode is your friend and extremely slow yaw movements. Try get shutter speed to “double” your frame rate. PS I am no expert.